CompactFlash (CF) Interface for Apple II's - Version 1.0       12/19/2001

Project Home: http://dreher.net/CFforAppleII/

This is an open source project to put a CompactFlash memory card into an
Apple IIe enhanced or later. Although any Apple II with a 65C02 should work.

The firmware in this project is for your reference and education only.
I make no guarantees or warranties for this software and I can't be held
responsible any damagages resulting from this software's use.

This software is free to use, modify or redistribute as you see fit.
If you find this code useful or interesting please send me an Email
and let me know. Email: rich@dreher.net


Files in this distribution:

(1) cfdrv.s        	 Apple ProDOS compatiable CompactFlash/IDE driver source file

(2) CFdrv.original.bin  EPROM ready binary of driver with debug off

(3) CFdrv_debug.bin     EPROM ready binary of driver with debug on

(4) go.bat              Simple DOS batch file to compile driver. Assumes
                        CA65 Cross assembler is installed properly.
                        Go to: http://www.cc65.org/  to find assembler

(5) idetest.s           A small test program that can be used to test the hardware
               		 Warning: this test program will write test data to every sector on the drive
               		 including the drive's Master Boot Record (MBR)


Special thanks to contributors:

Chris Schumann -
Jeff Pagel -
Stephane Guillard - stephane.guillard@steria.com
See http://s.guillard.free.fr/Apple2IDE/Apple2IDE.htm for his Apple/IDE interface project








