CFFA - CompactFlash (CF) Interface for Apple II's - Version 1.2       May 3, 2002

Project Home: http://dreher.net/CFforAppleII/

This is an open source project to put a CompactFlash memory card into an
Apple IIe enhanced or later. Although an Apple II with a 65C02 should work too.

The firmware in this project is for your reference and education only.
I make no guarantees or warranties for this software and I can't be held
responsible any damagages resulting from this software's use.

This software is free to use, modify or redistribute as you see fit.
If you find this code useful or interesting please send me an Email
and let me know. Email: rich@dreher.net


Files in this distribution:

(1) spdrv.s        	SmartPort compatiable CompactFlash/IDE firmware source file
			This file has to be assembled several times with different options
			selected to generate the EPROM ready file. The pieces are then
			combined together using the EPROM programmer software.

(2) spdrv.lst		Assembler listing file for the default selected firmware.

(3) CFFAv1.20.bin	EPROM ready binary of EPROM firmware shipped with initial CFFA release

(4) go.bat              Simple DOS batch file to compile driver. Assumes
                        CA65 Cross assembler is installed properly.
                        Go to: http://www.cc65.org/  to find assembler

(5) idetest.s           A small test program that can be used to test the hardware
            		Warning: this test program will write test data to every sector on the
			drive including the drive's Master Boot Record (MBR)


Special thanks to contributors:
Chris Schumann
Dave Lyons










